I saw a nice barn door design at a friend’s house and wanted to get my hands dirty creating my own version. For this build, I used ¾” steel plumbing pipe to act as a guide for the door. The door was attached to the pipe using eye bolts. The door itself consists of 4 4×8 sheets of ¾” mdf, glued and bolted together. The door must weigh about 300 lbs, and sits on top of two small casters, each with a 250 lb capacity. There are handles on either side, also made from plumbing pipe.
The build took me and a friend the better part of the afternoon. Once it was up and working, my wife painted it, and then we added the handles. I did have to move some surround sound speakers that were on the back wall and move them onto the ceiling, you can see a hole I cut in the ceiling to find the wires in one of the images below.
It’s a massive door for our small family room, but it is a nice element for the room, which can now be closed off from the kitchen. It’s too big to fit out any of the doors in our house, so its certainly a permanent part of our home.